Currently browsing: Technique

Mrs. Davenport’s Mesh

2339
8
»

MRS. DAVENPORT’S MESH – STITCH PATTERN
♥ OR QUEUE ON RAVELRY

My Mum (Güneş Davenport) unvented this mesh stitch the other day, and I was amazed by how easy and effective it is. Even a beginner could work it! I’m sure it exists somewhere in some form, but as I’ve never come across it before, I’m taking the liberty of naming it (taking my cue from a long tradition of stitch pattern collators), “Mrs. Davenport’s Mesh”. Here’s what it looks like:

Hmm, well admittedly not quite so attractive in its infant state, but when blocked… ta-da!

It works with any number of stitches. All you do is knit a stitch, place it back on the left-hand needle and knit it again. Then on the next row, you purl a stitch, place it back on the left-hand needle, and purl it again. When viewed from the RS, the knit rows lean left, and the purl rows lean right, forming an open zig-zag.

Like most mesh stitches, it grows a LOT when blocked, and therefore requires a very stretchy cast-on (even more so than the bind-off, I find). You can use your favourite cast-on technique, or work as follows…

Instructions

Cast on
Make loop or slipknot, *cast-on 1 st (using knitted cast-on method), k1, return st to left-hand needle, rep. from * as many times as necessary.

How to work the stitch pattern
CO any number of sts.

ROW 1 (RS): *K1, place resulting st back on left needle without twisting, k1, rep. from * to end.
ROW 2 (WS): *P1, place resulting st back on left needle without twisting, p1, rep. from * to end.

Rep. ROWS 1 & 2.

Bind off
K1, *place resulting st back on left needle without twisting, k2, pass right-most st on right-hand needle over left-most st, rep. from * until all sts have been bound off. Cut yarn and pull through final loop.

Increasing & Decreasing

I played around a little with increasing and decreasing using the basic principle of the mesh, but there are so many possibilities that I think it would make more sense to experiment with a particular project in mind.

Methods to Increase
Yo: Worked as usual.
Kfb: K1, place resulting st back on left needle, kfb.

Methods to Decrease
Ssk: Ssk, place resulting st back on left needle, k1.
K2tog: K2tog, place resulting st back on left needle, k1.

Garter Variation

If you knit in the western style, you will probably find that your purl rows go easier when working this stitch, because the movement you use to replace the stitch you’ve just purled back on the left-hand needle puts you in the right position to purl again. You’ll find the same thing happens when working knit rows in combined knitting. This made me wonder what a garter variation of the mesh stitch would look like, so I worked only ROW 2. I think you’ll agree that it forms a very nice textured fabric, without blocking.

In-the-round Variation

I’ve saved the best till last! Mrs. Davenport’s Mesh also looks beautiful when worked in the round. It’s as easy as repeating ROW 1 (and ignoring ROW 2) every round. When you eliminate the return rows that form the zig-zag, the stitch pattern continues in one direction, resulting in a lovely, lacy spiral, without the bother of actually having to count and shift stitches (or work a single yarn-over). I see some mindless arm-/legwarmers in my future! ;)

What I Love About Mum’s Mesh

Works with any number of stitches.
Super easy to work. Even a beginner knitter can manage it.
Easily modified.
No bias.
No curl.
Works the same whether you’re a western or combined knitter (or anything else).
Worked in exactly the same way in the round.

My Mum & I would love to see your projects using this stitch. Please leave a comment to urge her to keep unventing! :)

7th February, 2013 // Technique // tags: free, lace, mesh, stitch pattern.

Knitting, Animated (3KCBWDAY5)

2218
24
»

This post is part of Knitting & Crochet Blog Week. You can read all of last year’s posts here.

Last year for the experimental 5th day of Blog Week, I created ‘The Lonely Knitter’s Companion‘, an MP3 you can loop forever to keep you company as you knit. Since animated gifs seem to be making a comeback, I thought they would be a good medium to watch me knit… forever. :)

The purl gif in particular should come in handy when I want to quickly show people my easy purling technique on forums, etc. Please feel free to make use of them anywhere you like.

How I Cast On (longtail)

How I Knit

How I Purl

How I Cast Off

Smaller Versions

27th April, 2012 // Technique // tags: 3KCBWDAY5, blog week, gifs.

Dyeing with Red Cabbage & Tea

3333
20
»

If you listened to my interview with the lovely Lara Neel, you might remember me mentioning that I have been trying to convince my parents to go into hand-dyeing in their (impending) retirement. Well, today I tried hand-dyeing myself for the first time, and I now have an increased admiration for dyers and a better understanding of why those gorgeous skeins command such a high price.

I hadn’t tried dyeing before because I thought it required lots of extra equipment and careful measuring. Then I came across this etsy video which made it look sooo easy (not to mention that the resulting lavender is one of my favourite colours) that I had to try it right away. Since you’re only using regular foodstuffs, you don’t need special pans or protective gear. I picked up a red cabbage at the supermarket and found myself on Saturday morning getting ready for a morning of dyeing. Well, that morning turned into two days of boiling, rinsing, waiting, and blow drying, but it was all great fun.

So first of all I chopped up one whole red cabbage as small as I could, and boiled it with 2 tablespoons of salt for 30mins. Purple fingers, once again!

Meanwhile I let the yarn sit in a warm bowl of water, as instructed. The yarn is the lace/fingering-weight cotton I bought at the seaside this summer.

I didn’t use any mordants. I had considered using lemon juice, as that’s what I mix in with the henna for my hair, but apparently that’s only for animal fibres, whereas plant fibres like cotton and silk require an alkaline mordant (so says one commenter, anyway!). As for cream of tartar or alum, I have little idea of what they are or where I can get them in Turkey. So alas, no mordant.

After 30mins I strained the cabbage, leaving the purple cabbage juice in the pan. I felt a bit bad throwing all that cabbage away, but I didn’t know what I could do with a colander full of too-salty cabbage. :/

So once I brought the pan up to boil again, I added the soaked yarn and boiled it for nearly an hour. I prodded and turned the yarn around every so often to make sure it was thoroughly soaked. The pan got rather short on water around 30mins in, so I boiled some more water in the kettle and poured it in.

The yarn looked a delicious pinky purple in the water, but when I pulled it out it was a pale lavender.

Then came the most exciting part! Having read this cool KnitPicks article the day before I had divided my large hank into 3: 1 big part that would remain lilac, 1 smaller part that would be over-dyed green, and one tiny “transitional” part that I was going to try to make a lighter green. A little ambitious, I know…

Having fished out my hank, I added a packet of baking powder to the pot. It fizzled and looked a bit green, but when I dipped the spoon in it was still quite purple. So I drained some of the liquid away, and added another packet. Then I brought it up to boil and voila, green! Excitement!

So I placed my small hank in, and left it to boil for about 30mins. I could have left it longer, but most of the water had evaporated and I didn’t want to add any more in case I lightened the colour. The smallest hank I dipped in and drew out immediately. It turned a very pretty light teal colour.

Since I had quite a bit of the dye liquids left over, I couldn’t resist one last experiment. I brewed some very strong Turkish tea in a small saucepan and popped another hank in for about 40mins. It turned a lovely tan colour. I used loose tea, and some of it got past my strainer, but it wasn’t a big deal. I just gave it a good shake when it was a little dryer, and most of the tea leaves fell out.

I wanted to try some yarn painting, so I lay my hank out on a piece of aluminium foil and dripped pools of the red cabbage + baking powder mixture over it.

It looked really pretty at this stage, so I dried it with a hair dryer to try and keep the colours from moving too much. That didn’t work, unfortunately, the green and tea-colour merged together and I ended up with this semi-solid colour, with streaks of dull green and somehow also purple! It’s very subtle but I love the way it looks. In the end it’ll be easier to knit into a pattern than the splotchy brown/green would have been.

The final result:

tea + “green cabbage”:

green cabbage on the left, red cabbage on the right (all still damp). The streaks of dark colour are from fibres that were touching the side of the hot pan. Interesting, no?

Strangely the hank with the red cabbage turned from a pale blue when damp, to a pretty pale lavender, with streaks of green, when dry. The green didn’t change in hue, and in fact there’s hardly any difference between the hank I dipped in & pulled out, and the one I left to boil for half an hour! Also, the baking powder’s made the green yarn a bit “crunchy”. Hopefully another rinse in some Eucalan will soften it up once more.

Not quite up to The Natural Dye Studio, but I’m pleased with my first attempt. :) How colourfast they will be, I don’t know. I’m going to swatch & wash the yarn soon, and I’ll blog about my results. Hopefully I can make a nice shawl out of my first hand-dyed yarn.